Summary

To wrap up the entire project it took about 3 weeks, if i worked each day. Instead it was upon a 3 month spread. I started with a 2' X 4' of oak plywood. I used a table saw to cut down the main peices of the case. I used prodesktop to design my parts and the assembly. The front and back were cut from a shopbot. I used a great deal of time using the shopbot to cut out the pieces (learning and functioning the shopbot). Once they were finally cut, i assembled the parts with the motherboard and power supply attached. it was all together except for the door. I then stained and polyed the wood to get the nice mahogany finish. I then added the main componets of the computer and attached the door.